Digital Cameras from JENOPTIK ProgRes, PCO, Lambert

High end digital Cameras for microscopy - ProgRes Series
High sensitive and performance digital cameras
Image Intensifiers for low light level and Intensified cameras

High end digital cameras for microscopy - ProgRes Series (현미경용 디지털 카메라)

	● ProgRes® CCD SpeedXT core Cameras
		ProgRes CCD SpeedXTcare Cameras New!! - SpeedXTcore 3 : 3.2 mega pixel 1/1.8" CCD, 12bit, color CCD 카메라 - SpeedXTcore 5 : 5.0 mega pixel 2/3" CCD, 12bit, color CCD 카메라
	● ProgRes® CMOS Cameras
		ProgRes CT3 New!! - 3.15 megapixels, 10 bit, 저렴한 현미경용 디지털 color CMOS 카메라
	● ProgRes® CCD Routine Cameras
		ProgRes C3 / C3cool - 3.3 megapixels, 12 bit, 현미경용 디지털 color CCD 카메라
		ProgRes C5 / C5cool - 5 megapixels, 12 bit, 고해상도 현미경용 디지털 color CCD 카메라
		ProgRes C7 New!! - 7.1 megapixels, 12bit, 고해상도 color CCD, perfectly suited for usage in macroscopic and microscopic imaging
	● ProgRes® CCD Research Cameras
		ProgRes CF - 1.45 megapixels, 12bit, 고감도 color CCD sensor, suited for usage in research microscopic procedures.
		ProgRes CFcool - 1.45 megapixels, 14bit, 고감도 color 냉각 CCD sensor, suited for usage in research microscopic procedures.
		ProgRes CFscan - 12.5 megapixels (4080x3072), 14bit, 고감도/고해상도 color 냉각 CCD, perfectly suited for usage in research microscopic procedures.
		ProgRes C14plus - True 12.5 megapixels (4080x3072), 14bit, Microscanning and Color-Co-Site-Sampling, 최고해상도/고감도 color 냉각 CCD 카메라
		ProgRes MF - 1.45 megapixels, 12bit, 고감도 흑백 CCD sensor, suited for usage in fluorescence microscopic procedures.
		ProgRes MFcool - 1.45 megapixels, 14bit, 고감도 monochrome 냉각 CCD, perfectly suited for usage in research fluorescence microscopic procedures.
		ProgRes MFscan - 12.5 megapixels (4080x3072), 14bit, 고감도/고해상도 monochrome 냉각 CCD, perfectly suited for usage in research fluorescence microscopic procedures.

[TOP]

High sensitive and performance sientific digital cameras (고성능 디지털 카메라)

	● sCMOS Cameras
		pco.edge - extreme low readout noise of 1.4e-rms, resolution 2560 x 2160, thermal stabilization at 5°C
	● Sensitive Cameras
		sensicam em - electron multiplication gain of up to 1000, resolution 1004 x 1002, cooling with a delta of -45°C
		sensicam qe - 12 bit cooled CCD; super quantum efficiency up to 65%, shutter 500ns - 3600s, cooling down to -12°C, extremely low noise, down to 4 e- rms
		pco.4000 - 14 bit cooled CCD; superior resolution (4008 x 2672pixel), image memory up to 4GB, cooling of delta -45°C
		pco.2000 - 14 bit cooled CCD; excellent resolution (2048 x 2048pixel), interframing time of 180 ns, cooling of delta -50°C
		pco.1600 - 14 bit cooled CCD; superior resolution (1600x1200pixel), frame rate 30 fps at full resolution, IEEE1394 or camera link
		pixelfly vga - 12 bit CCD; ultra compact design; high frame rate - 50fps, temperature compensated , exposure times from 5 μs - 65 s
		pixelfly qe - 12 bit CCD; ultra compact design; super quantum efficiency up to 65%, resolution (1392 x 1024 pixel),temperature compensated, exposure times from 5 μs - 65 s
		pco.1300 - 12 bit cooled CCD; super quantum efficiency up to 65%, cooling of delta -25°C, standard IEEE1394a ("FireWire") interface
		pco.1300 solar - 12 bit cooled CCD; super quantum efficiency up to 11% @ 900nm, designed for electro luminescence (EL) applications
		sensicam uv - excellent per quantum efficiency in UV (QE 10% @193nm), electron multiplication gain from 1 to 500 , high resolution 1004 x 1002 pixel, thermo-electrical cooling down to -12°C
	● Specialized Cameras
		sensicam qe double shutter - 12 bit cooled CCD for PIV; very short interframing time of 500 ns
		pixelfly double shutter - 12 bit CCD for PIV; short interframing time of 5μs (PIV)
	● Intensified Cameras
		dicam pro - 12 bit Intensified CCD, exposure down to 3 ns
		hsfc pro - Four 12 bit intensified imaging modules, exposure down to 3 ns

Image Intensifiers for low light level and Intensified Cameras

	● Fluorescence Lifttime Imaging - FLIM
		Overview of all FLIM options offered by Lambert Instruments: Lambert Instruments Fluorescence Attachment - LIFA with modulated LED and modulated ICCD and user-friendly software optional: with directly modulated diode laser as widefield light source combined to Yokogawa spinning disk for confocal microscopy FLIM images combined to laser-TIRF for FLIM images in TIRF mode OR
	Build your own Fluorescence Lifetime Imaging Microscopy LIM system add the modulated image intensifier II18MD, the key component of the LIFA (Lambert Instruments Fluorescence Attachment) See our list of test sites where Lambert Instruments fluorescence lifetime imaging products are used and publications list LIFA / II18MD papers for references and information on possible applications. The picture shows?4 HeLa cells with FRET (Alexa488 and Alexa568) only at the centrosomes (the microtubule organizing centers of the cell): the?lifetime of?Alexa488 at the centrosomes has decreased to 2,3ns, and the lifetime of?Alexa488 outside the centrosomes is 2,7ns. The pseudo colored lifetime?is merged with the gray scaled?intensity image. Courtesy of Prof. Diaspro, Genua, Italy.

		LIFA, Lambert Instruments Fluorescence Attachment The LIFA (Lambert Instruments Fluorescence Attachment) for lifetime imaging microscopy (FLIM) can be attached to any widefield fluorescence microscope and works in the homodyne frequency domain. This means that it consists of a modulated light source and a modulated image intensifier as detector (i.e. ICCD camera). The system is easy to install (within 1 hour) and to operate and does not require an optical bench with laser. The LIFA system has been judged "easy and highly quantitative" for a.o. FLIM FRET studies. See further for its components.
	LIFA-Combined To Laser - TIRF The combination of the LIFA (Lambert Instruments Lifetime Attachment) with laser-TIRF enables lifetime imaging microscopy (FLIM) while detecting just the first 100nm of the sample. TIRF FLIM images provide better resolution and are more specific regarding lifetime values per region of interest which is important e.g. in case of FLIM FRET studies of the cellular plasma membrane.
		LIFA, Combined To Yokogawa Spinning Disk The combination of the LIFA (Lambert Instruments Lifetime Attachment) with the?Yokogawa spinning disk enables lifetime imaging microscopy (FLIM) while doing optical sectioning. The confocal images provide better resolution and are more specific regarding lifetime values per region of interest which is important in case of e.g. FLIM FRET studies.
		ILIFA-X, for Long Ligetime Phosphorescence Imaging the newest addition to the LIFA roduct line is the LIFA-X. LIFA stands for Lambert Instruments Fluorescence lifetime imaging Attachment. The LIFA-X for long lifetime imaging microscopy of lifetimes from 0.1 ns up to 1 ms (phosphorescence). The represents the extended range of lifetimes that can be resolved when compared to the LIFA (0.1 ns 300 ns). The LIFA-X can be used for, e.g., measuring oxygen concentrations using optodes or reactive oxygen species in cells.
		Ⅱ18MD, Modulated Image Intensifier The II18MD is the Image Intensifier with an 18mm diameter input screen that can be modulated and is digitally controlled. The II18MD modulated image intensifier is used as key component for FLIM (Fluorescence Lifetime Imaging Microscopy) in the homodyne frequency domain. The II18MD modulated image intensifier is designed for users who wish to apply the highest quality detector as part of their set-up for fluorescence lifetime imaging.
	Multi - LED Developed as a versatile excitation light source for FLIM in the frequency domain, our Multi-LED system provides excitation light at high modulation depths. Compared to other light sources, the high-power LEDs provide non-phototoxic illumination levels, and have a long economic lifespan. Available wavelengths cover the range from 360 to 640nm.

	● Intensified CCD Cameras (ICCD)
		An Intensified CDD (ICCD) camera is an electronic camera, analogue or digital, equipped with an intensified CCD as image sensor. The sensor uses an image intensifier that is fiber optically coupled to the CCD chip to increase the sensitivity down to single photon level. An ICCD camera allows image acquisition at very low light levels over a wide range of spectral response and at relatively high speed. Single photons can be detected and discriminated from CCD noise. Ultra high-speed phenomena can be captured by using the image intensifier as a fast shutter (gating).

		LI2CAM, Intensified CCD Camera Fast, high resolution, ICCD -intensified CCD camera offering sensitivity down to single photon level. The LI2CAM is computer controlled, offering many features like variable integration times, partial scan mode (ROI), binning and ast gating down to 2ns (optional)
		Day/Night Camera This ICCD -Intensified CCD "Day / Night" camera is a very sensitive low light level camera. The image intensifier is equipped with automatic gain and gating control.

	● Intensified Camera Attachments
		Lambert Image Intensifier Ⅱ18/G/GD/GDF The Lambert Image Intensifier II18 is a low-light-level camera attachment that can be coupled to a monochrome (B/W) video camera with 1/2", 2/3" or 1" image sensor. The Lambert Image Intensifier II18 increases the sensitivity of the camera and enables the detection of images at a light level as low as 10-5lux. The spectral sensitivity can be matched to the application within the range from 170nm to 900nm.