| |
Profile Projector/Measuring
Microscope
Common Accessories
| MHS
6x4 |
| The
workpiece is loaded and moved in an X/Y direction and the
quantity of the movement is read. |
Cross
travel: 150 (X)x100 (Y) mm
Reading equipment: Linear encoder
|
 |
|
|
| MHS
4x4 |
| The
workpiece is loaded and moved in an X/Y direction and the
quantity of the movement is read. |
Cross
travel: 100 (X)x100 (Y) mm
Reading equipment: Linear encoder
|
 |
|
|
| Stage
Type O3L |
| The workpiece is loaded and moved
in an X/Y direction and the quantity of the movement is read. |
Stage Type O3L
Cross travel: 100 (X)x50 (Y) mm
Reading equipment: Linear encoder
|
 |
| Stage
MHS 2x2 |
| he
workpiece is loaded and moved in an X/Y direction and the
quantity of the movement is read. |
Stage MHS 2x2
Cross travel: 50 (X)x50 (Y) mm
Reading equipment: Linear encoder
|
 |
| Slidind
Stage |
| A
stage with a rotary mechanism |
Exclusive for use with the
V-20B and V-12B profile projectors.
Cross travel: 30 (X)x30 (Y) mm (no calibrations)
Provided with a rotary mechanism. |
|
|
| Rotating
Table Type C |
| Used
in combination with a stage when rotating a workpiece. |
|
|
This
table is used to rotate the workpiece and align it in the
direction to which the stage moves.
For use with the MHS 4x4, M 6x4 Stages.
Table diameter: 204mm
Glass insert diameter: 165mm
|
 |
|
|
| Rotating
Table D |
| Used
in combination with a stage when rotating a workpiece. |
This table
is used to rotate the workpiece and align it in the direction
to which the stage moves.
For use with the MHS 10x6, MHS 8x6, 9V, and 100B stages.
Table diameter: 282mm
Stage glass diameter: 262mm
|
 |
| Rotating
Table A2 |
| Used
in combination with a stage when rotating a workpiece. |
This table
is used to rotate the workpiece and align it in the direction
to which the stage moves.
Table diameter: 160mm
Stage glass diameter: 107mm
|
 |
|
Rotary Indexer RI-3600 |
| This
indexer can rotate the image of a workpiece and display it
on the screen with a 0.01¡Æ resolution. |
By attaching this indexer
to the NEXIV series CNC video measuring system, it can be
externally controlled, enabling automatic measurements while
controlling the posture of the workpiece.
Control resolution: 0.01°
Maximum workpice diameter: 75mm
For use with the MHS 4x4 and the NEXIV series.
|
| 3-Axis
Digital Counter SC-213 |
| This
3-axis counter displays the Z axis in addition to X and Y
axes. |
The separate display unit
can be mounted on the measuring microscope. An RS-232C port
is provided.
|
| 2-Axis
Digital Counter SC-212 |
| This
2-axis counter displays X and Y axes. |
Can be connected
with data processors and digital printers via the RS-232C
port.
|
 |
| Digital
Printer DPU-414 |
| Connected
to the SC-213/212 counters, it prints out XY counter values. |
This printer can be used
with autocollimators.
When used with the SC-213 counter, either X-Y or Z value can
be printed out.
|
| Tilting
Center Fixtures-V-Block Fixtures |
| Used
when holding machined workpieces. |
There are types
A and B Tilting Center Fixtures for use with Rotary Table
03L and stage 9V respectively and they are used for holding
machined workpieces.
V-Block Fixture (Used with 9V/O3L)
Used for holding rod-shaped workpieces crosswise that are
otherwise hard to hold with Tilting Center Fixtures. (Unloaded
weight 1kg)
|
| 300mm Standard Scal
|
| This scale can gauge the travel precision of a stage up to 300mm. |
This comes with both 10mm-step
patterns and ordinary calibrations. It employs low expansive
glass to curtain the influence from heat.
Accuracy: within 1um against the corrected value (provided
with accuracy table)
|
| Data
Processors for Use with Profile Projector/Measuring
Microscopes DP-303 |
| An
all-around model capable of data management and other tasks
related to measurements |
* ROM-DOS
based operating system
* Large, dialog-type LCD display
* Built-in 3.5-inch floppy disk drive
* Built-in 3-axis counter
* Compact body and affordable price
* Built-in high-speed line printer
* RS-232C interface
|
 |
| Data
Processors for Use with Profile Projector/MeasuringMicroscopes
DP-202 |
| A
feature-packed compact model |
*No
preliminary scanning of the workpiece necessary
* Compact design
* Display lamp indicating the number of input data
* Error warning buzzer
* RS-232C interface card (option)
|
 |
| Inspection
Result Sheet Generation Software CustomFit QC |
| Ideal
for managing result data that contain maximum/minimum values,
widths allowances, standard deviations, process capability
indices, lot by lot |
*User's
original result forms can be created in addition to 10 standard
forms.
* BMP and JPEG files can be pasted up on result sheets.
* Simple switchover between auto report generation and degree/minute/second
display.
* Histograms, X-R management charts, distribution charts are
easily generated.
OS: Widows Microsoft Office 97 or later
Memory space: 64MB or more
*This software was developed jointly with Anc Software Co.,
Ltd.
|
 |
|
|
