9818 Pulse Generator

 

  
 


                                              

                                                  (click image to enlarge and get detailed specs)
 

    1 ns resolution 8 independent outputs or inputs.
    Construct a 'Custom Pulse Generator' from a wide array of electrical or fiberoptic modules - price
    starting at $2,990.
    Mix and match modules to obtain the right configuration of signals for a specific application.
    Contact the Sales Department for configuration and module pricing.

 
 

                                                      

                                                                        FEATURES
 
 Operational Modes
   - continuous, single shot, duty cycle, burst, gate
 Enhanced Channel Modes
   - enable, independent gate, divide-n all channels
 External Trigger/Gate

 
                                 SPECIFICATIONS
 
 Channels
 8
 Outputs
 8
 Frequency
 5 MHz
 Resolution
 10ns
 Jitter
 < 1ns
 Number of Stored
 Configurations
 12
 RS-232 Interface
 Standard
 GPIB Interface
 Optional
 USB Interface
 Standard
 Ethernet
 Optional
 Each output is fully configurable from  the available
 outputs of:
 Available Outputs

 - TTL/CMOS
 - Adjustable 2 - 20A
 - 35V (option)
 - Adjustable 0 - 25 A
 - 820 nm Optical
 - 1300 nm Optical

 
    PULSE GENERATION  
 
 CHANNELS
 8 independent outputs, with digitally
 controlled delay and pulsewidth
 MODES
 normal, single shot, burst, duty cycle
 MULTIPLEXER
 counters may be combined (OR¡¯d) &
 routed to any output
 DELAY
 0 - 1000 sec
 PULSEWIDTH
 10 ns - 1000 sec
 RESOLUTION
 1 ns
 ACCURACY
 1 ns + .0001 delay
 TIMEBASE
 100 MHz, 25 PPM crystal oscillator
 RMS Jitter
 <400 ns
 BURST MODE
 1-1,000,000 pulses

 
               EXTERNAL TRIG/GATE
 
 RATE
 Dc -5 MHz
 THRESHOLD
 200 mV - 15 V
 INPUT RANGE
 0 - 30 V
 TRIGGER SLOPE
 rising or falling time
 RMS Jitter
 < 5 ns
 INSERTION
 DELAY
 < 150 ns

 
     INTERNAL RATE GENERATOR
 
 MODES
 single shot, external trigger
 RATE (To period)
 200 ns to 5000 sec (.0002 Hz to 5MHz)
 RESOLUTION
 10 ns
 ACCURACY
 5 ns + .0001 x period
 RMS JITTER
 < 400 ps
 BURST MODE
  1 to 1,000,000 pulses

 
                       INPUT MODULES
  < tr> < tr> < tr>
 ELECTRONIC
 Adjustable (Option 11)
 Threshold
 20 mV - 15 V
 Input Range
 0 - 30 V
 Trigger Slope
 rising or falling edge
 Input Impedence
 1 kOhm
 RS422 Compatible (Option 12)
 High-Level Input Voltage
 2 V min
 Low-Level Input Voltage
 0.8 V max
 Common-Mode
 Input Voltage
 ¡¾ 7 V max
 Common-Mode Sensitivity
 ¡¾ 200 mV
 Input Hysteresis
 50 mV typical
 Input Impedance
 12 KOhm
 TTL/CMOS (Option 13)
 High-Level Voltage
 2 V
 Low-Level Voltage
 .8 V
 Trigger Slope
 rising or falling edge
 Input Impedence
 51 kOhm
 OPTICAL
 Optical Trigger (Option 21)
 Wavelength
 820 nm
 Signal Rate
 5 - 160 MBd
 Spec¡¯d with
 50/125 ¥ìm, 62.5/125 ¥ìm,
 100/140 ¥ìm, & 200 ¥ìm
 HCS¢ç fiber
 Distance
 0.5 - 2.7 km
 Connector Options
 ST¢ç
 Optical Trigger (Option 22)
 Wavelength
 1300 nm
 Signal Rate
 5 - 160 MBd
 Spec¡¯d with
 50/125 ¥ìm, 62.5/125 ¥ìm,
 100/140 ¥ìm, & 200 ¥ìm
 HCS¢ç fiber
 Distance
 0.5 - 2.7 km
 Connector Options
 ST¢ç

 
                       OUTPUT MODULES
 
 ELECTRONIC
 TTL/CMOS (Option 31)
 Slew Rate
 > 0.1 V/ns
 Overshoot
 < 100 mV
 Amplitude
 Low Level = 100 mV
 High Level = 4.9 V
 Adjustable (Option 32)
 Impedance
 50 Ohms
 Slew Rate
 > 0.05 V/ns
 Overshoot
 < 100 mV + 10% of pulse amplitude
 Amplitude
 0 - 20 V adjustablel
 35 V (Option 33)
 Impedance
 50 Ohms
 Slew Rate
 > 0.05 V/ns
 Overshoot
 < 100 mV + 10% of pulse amplitude
 Amplitude
 10 - 35 V
 OPTICAL (Option 41)
 Fiber Optic
 Wavelength
 820 nm
 Rise Time
 < 6.5 ns
 Pulse Width Distortion
 0.5 ns
 Signal Rate
 5 - 160 MBd
 Spec¡¯d with
 50/125 ¥ìm, 62.5/125 ¥ìm,
 100/140 ¥ìm, & 200 ¥ìm
 HCS¢ç fiber
 Distance
 0.5 - 2.7 km
 Connector Optics
 ST¢ç
 OPTICAL (Option 42)
 Fiber Optic
 Wavelength
 1300 nm
 Rise Time
 < 6.5 ns
 Pulse Width Distortion
 0.5 ns
 Signal Rate
 5 - 160 MBd
 Spec¡¯d with
 50/125 ¥ìm, 62.5/125 ¥ìm,
 100/140 ¥ìm, & 200 ¥ìm
 HCS¢ç fiber
 Distance
 0.5 - 2.7 km
 Connector Optics
 ST¢ç

 
                   CONFIGURATIONS
 
 USER SET-UP
 STORAGE
 Storage for 12 complete configurations
 may be stored and recalled from the
 front panel or the computer interface.

 
               COMPUTER INTERFACE
 
 RS232
 4800.9600,19200,38400 Baud.
 All instrument functions and settings
 may be controlled over the interface bus
 USB
 v 1.0
 GPIB
 IEEE 488.2 (optional)
 ETHERNET
 Optional (replaces USB)

 
                        GENERAL
 
 DIMENSIONS
 10.5¡± x 8.25¡± x 5.5¡±
 WEIGHT
 8 lbs
 POWER
 20 watts
 100 - 240 VAC
 47 - 63 Hz
 < 1 A