INTRODUCTING
THE NEW PULSE GENERATOR FROM QUANTUM COMPOSERS!
The Model 9530 Digital Delay | Pulse
Generator series represents the latest in timing and synchronizing
capabilities. With a unique 19" 1U form factor, the Model
9530 is clearly our most innovative instrument to accurately
synchronize any series of events.
The 9530's eight independent outputs, dual trigger/gate
inputs and external clock reference input make it ideal for
laser system timing applications. The system can directly phase
lock to an external timebase up to 100MHz in frequency and down
to 20mV in amplitude. This allows synching directly to a laser
photodiode signal and provides complete system timing relative
to the laser timing with low jitter.
The 9530 also provides a Clock Output that is
capable of driving a 50 Ohm load and can be used to provide
a master timebase to other delay generators or equipment.
The core technology in precision timing of the
9530 Pulse Generator offers 250pS Delay & Width resolution
and 200pS internal jitter. Ethernet / USB interface, complex
burst sequences, Divide-by-N, Setting Profiles, Dual Triggers,
Dual Gating, Clock Divider, Pulse Picking and Negative Delays
allow users great confidence in setting up an experiment or
synchronizing multiple events.
Complimentary NI certified LabVIEWtm drivers
available.
Key Features:
• 8 independent outputs with full individual
programming and control
• Internal rate generator - 10ns period resolution over
entire frequency range (20MHz)
• Complete channel and system setup stored in memory -
Provides 12 memory storage slots
• Remote programmability - RS232, USB and Ethernet
• 250ps timing resolution with < 200ps jitter
• Dual inputs (gate and/or trigger
Advanced Features:
• Clock input/output - allows master clock input
from 10MHz to 100MHz with complete system timing relative to
that signal with low jitter
• Field programmability - custom features, upgrades and fixes
via fully programmable FPGA
• Settings / Programming saved on power down
Channel Properties/Advanced Programming
Modes:
• Multiplexing - Selectively combine the
timing of any or all channels to one output
• Burst - Each channel can have a separate number
• Duty Cycle - N pulses on, M pulses off. Duty Cycle mode
allows firing laser at an optimal rate, but picking pulses out
at the user required rate.
• Channel Referencing - Any or all channels can reference
the timing of any channel rather than T0
• Wait - The system will wait for a specified number of
cycles before producing pulse
Base Price: Please contact
us for a quote
Options: - Dual Trigger
Complimentary LabVIEW driver available
